specifcations subject to change without notice. all dimensions in inches. ? copyright 2009 the connor-winfeld corporation 2111 comprehensive drive aurora, illinois 60505 phone: 630- 851- 4722 fax: 630- 851- 5040 www.conwin.com 2111 comprehensive drive aurora, illinois 60505 phone: 630- 851- 4722 fax: 630- 851- 5040 www.conwin.com surface mount 5x7mm lvpecl clock oscillator description: the connor winfeld pxxx - series is a 5x7.0 mm surface mount, lvpecl, fixed frequency crystal controlled oscillator (xo) designed for applications requiring tight frequency stability, wide temperature range and low jitter. operating at 2.5v or 3.3v supply voltage, the pxxx - series provides an lvpecl differential outputs with enable / disable function. the surface mount package is designed for high-density mounting and is optimum for mass production. operating specifcations parameter minimum nominal maximum units notes output frequency (fo) 25 - 260 mhz total frequency tolerance (see ordering information for full part number) model px4x -20 - 20 ppm 1 model px1x -25 - 25 ppm 1 model px2x -50 - 50 ppm 1 model px3x -100 - 100 ppm 1 operating temperature range model p1xx 0 - 70 c model p2xx -40 - 85 c model p3xx 0 - 85 c model p4xx -20 - 70 c supply voltage (vcc) model pxx2, pxx5 2.375 2.5 2.625 vdc model pxx3, pxx4 3.135 3.3 3.465 vdc supply current (icc) - 60 90 ma jitter: period jitter - 3.0 5.0 ps rms integrated phase jitter (bw = 12 khz to 20 mhz) 25 < fo < 60 mhz - 1.3 2.0 ps rms 60 < fo < 80 mhz - 0.80 1.0 ps rms 80 < fo < 100 mhz - 0.60 0.80 ps rms 100 < fo < 160 mhz - 0.45 0.60 ps rms 160 < fo < 200 mhz - 0.35 0.50 ps rms 200 < fo < 260 mhz - 0.30 0.45 ps rms ssb phase noise @ 10 hz offset - -60 - dbc/hz @ 100 hz offset - -90 - dbc/hz @ 1 khz offset - -115 - dbc/hz @ 10 khz offset - -140 - dbc/hz @ 100 khz offset - -145 - dbc/hz start-up time - - 2 ms absolute maximum ratings parameter minimum nominal maximum units notes storage temperature -55 - 125 c supply voltage (vcc) -0.5 - 7.0 vdc input voltage (vc) -0.5 - vcc + 0.5 vdc features: model pxxx - series 5.0 x7.0mm surface mount package 2.5v or 3.3v operation lvpecl differential outputs frequency stabilities available: +/-20ppm,+/-25ppm, +/-50ppm, +/-100ppm temperature ranges available: 0 to 70c, -40 to 85c, 0 to 85c, -20 to 70c low jitter <1ps rms tri-state enable/disable on pad 1 or 2 tape and reel packaging rohs compliant / lead free bulletin ec217 page 1 of 2 revision 09 date 18 dec 2009 us headquarters: 630-851-4722 european headquarters: +353-61-472221 input characteristics parameter minimum nominal maximum units notes enable / disable option: models pxx2, pxx3 e/d pad 1. n/c pad 2 models pxx4, pxx5 e/d pad 2. n/c pad 1 enable input voltage - (high) -(vih) 70%vcc - - vdc 2 disable input voltage - (low) - (vil) - - 30%vcc vdc 2 enable time - - 2 ms disable time - - 200 ns standby current (when osc. is disabled) - - 30 ua lvpecl output characteristics parameter minimum nominal maximum units notes load - - 50 - ohm 3 voltage (high) (vcc = 2.5 v) (voh) 1.475 - - v (low) (vcc = 2.5 v) (vol) - - 0.880 v voltage (high) (vcc = 3.3 v) (voh) 2.275 - - v (low) (vcc = 3.3 v) (vol) - - 1.680 v duty cycle at 50% level 45 50 55 % 4 rise / fall time: 20% to 80% - 0.5 1.0 ns cw 0946 p123 155.52 mhz
specifcations subject to change without notice. all dimensions in inches. ? copyright 2009 the connor-winfeld corporation 2111 comprehensive drive aurora, illinois 60505 phone: 630- 851- 4722 fax: 630- 851- 5040 www.conwin.com bulletin ec217 page 2 of 2 revision 09 date 18 dec 2009 dimensional tolerance: .02 (.508mm) .005 (.127mm) suggested pad layout output waveform tape and reel dimensions environmental characteristics vibration: vibration per mil std 883e method 2007.3 test condition a. shock: mechanical shock per mil std 883e method 2002.4 test condition b. soldering process; rohs compliant lead free. see soldering profle on page 2. solderability; solderability per mil std 883e method 2003. pad connections function: output low: disabled (high impedance) high or open: enabled solder profle 120c 150c 180c 260c 0 220c 360 sec. max. 120 s max. 10 s 60 s max. ti me te mperature 260c enable / disable function 0.200 (5.08mm) 0.100 (2.54mm) 0.079 (2.0mm) 0.165 (4.2mm) 0.070 (1.78mm) bypass capacitor 0.01uf ground to p v iew 4 5 6 3 2 1 q q 50% 20% 80% tr duty cycle tf cw 0946 p123 155.52m .059 (1.50mm) 0.275 (7.0mm) 0.197 (5.0mm) 0.102 (2.6mm) 0.055 (1.4mm) dimensional t olerance +/-0.008 (+/-0.2mm) r3 r1 r4 r2 vc c r 1 / r3 r2 /r 4 2.5v 250 oh ms 62.5ohm s 3.3v 130 oh ms 82 oh ms enabl e / disable or n/c 1 2 3 6 5 4 vc c = vcc2 package characteristics package hermetically sealed ceramic package and metal cover type lvpecl clock series 5x7 mm temperature range 1 = 0 to 70c 2 = -40 to 85c 3 = 0 to 85c 4 = -20 to 70c frequency stability 4 = 20 ppm 1 = 25 ppm 2 = 50 ppm 3 = 100 ppm output frequency frequency format -xxx.xm min -xxx.xxxxxxm max *amount of numbers after the decimal point. m = mhz p 1 2 - 155.52m supply voltage 2 = 2.5 vdc, e/d pad 1 3 = 3.3 vdc, e/d pad 1 4 = 3.3 vdc, e/d pad 2 5 = 2.5 vdc, e/d pad 2 3 ordering information package outline example: part number p123-155.52m = lvpecl output, 0 to 70, +/-20ppm, 3.3vdc, e/d pad 1, output frequency 155.52mhz test circuit models pxx4, pxx5 1: n/c 2 enable / disable 3: ground 4: output q 5: complementary output q 6: supply voltage (vcc) models: pxx2, pxx3 1: enable / disable 2 n/c 3: ground 4: output q 5: complementary output q 6: supply voltage (vcc) notes: 1. includes calibration @ 25c, frequency stability vs. change in temperature, supply voltage and load variations, shock and vibration and 20 years aging. 2. when the oscillator is disabled the outputs are at high impedance. outputs are enabled with no connection on pad 1. 3. outputs must be terminated into 50 ohms to vcc C 2v or thevenin equivalent. 4. duty cycle measured at 50% of output voltage swing..
|
